2018 Toro 8000 Series 42" 25HP 725cc (74315)

Featuring a 42" (106.7 cm) cutting deck and added power of a 25 HP Kohler® Command Pro 725cc Engine. The rear-discharge deck lets you trim on either side while keeping flower beds and walkways clipping-free. And the high-capacity collection system helps extend mowing time. With ground speeds up to 7 mph, the 8000 Series is the answer for a perfect cut in less time.

Highlights

25 HP Kohler® Command Pro 725cc Engine

42" (106.7 cm) closed, floating cutting deck with counter rotating twin blades

Large 9.5 bushel hopper allows for extended bagging

Easy to use controls make maneuvering virtually effortless

Features

Bag, Mulch or Both: The fill-reduction system lets you switch from 100% bagging to 75% mulching and 25% bagging, so the hopper can be emptied less frequently.

Effortless Controls: No need to muscle these mowers around. The controls let you maneumver in tight spots almost effortlessly.

Out Front Deck Design: The out-front deck design allows for more maneuverability and mowing in tighter areas where traditional zero turns can't get to.

High Capacity: The 9.5-bushel hopper means less time emptying and more time mowing. Exclusive baffle design fills evenly back to front for maximum efficiency.

Tough, Deep Decks: Commercial deck is made of welded 7/10 gauge-steel. The deep 4-5/8" design handles taller grass and provides greater vacuum for a clean, refined cut.

Trim On Both Sides: The rear discharge deck allows for trimming on either side keeping flower beds and walkways clipping-free.

Specifications

Engine: 25 HP (18.6 kw) Kohler® Command Pro 725cc*

Fuel Capacity: Gas/7.5 gal (28.4 L)

Cutting Width: 42" (106.7 cm)

Adjustable Discharge Baffle: Fill reduction baffles standard

Air Filter: Heavy-Duty Canister Air Cleaner

Blade Tip Speed: 18,500 ft/min (5,640 m/min)

Blade Type: .164" (.417 cm) heat-treated steel

Carrier Frame: 2" x 1.5" x 11 gauge (5.1 cm x 3.8 cm x 11 gauge)

Caster Tires: 8" X 3" - 4" (20.3 cm x 7.6 cm - 10.2 cm) Semi Pneumatic

Clutch: Mechanical (lever-operated)

Deck Design: 7/10 gauge

Drive System: Tandem Pumps (12cc/rev) & Wheel Motors (18 cir)

Drive Tires: 18" x 10.5" - 10" (45.7 cm x 26.7 cm - 25.4 cm)

Engine Horsepower: 25 HP

Engine Displacement: 725cc

Ground Speed: Up to 7.0 mph forward (11.4 km/h)

Height of Cut: 1" - 4" (.25" increments) 2.5 cm - 10.2 cm (.6 cm increments)

Hopper Capacity: 9.5 bushels (76 gallons)

Hour Meter: Standard

Ignition: Electric

Seat: Rubber Mounted

Spindle Housing: Cast Iron Gearbox

Steering Controls: Hand Control Levers

Weight: 1,140 lbs. (517.1 kg)

NOTES:

*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.